Vehicle audio solutions since 2001
01392 829435 (Available Monday to Friday - 8.30am to 4.30pm)
Stock code: AMP-ALP-BBX-F1200
Stock code: AMP-ALP-BBX-T600
Stock code: AMP-ALP-MRV-M250
Stock code: AMP-ALP-PDP-E802DSP
Stock code: AMP-ALP-R2-A150M
Stock code: AMP-ALP-R2-A60F
Stock code: AMP-ALP-R2-A75M
Stock code: AMP-ALP-S2-A120M
Stock code: AMP-ALP-S2-A60M
Stock code: 33-104
Stock code: 33-108
Stock code: AMP-JL-HD1200/1
Stock code: AMP-JL-HD600/4
Stock code: AMP-JL-HD750/1
Stock code: AMP-JL-HD900/5
Stock code: AMP-JL-JD1000/1
Stock code: AMP-JL-JD250/1
Stock code: AMP-JL-JD400/4
Stock code: AMP-JL-JD500/1
Stock code: AMP-JL-RD1000/1
Stock code: AMP-JL-RD1500/1
Stock code: AMP-JL-RD400/4
Stock code: AMP-JL-RD500/1
Stock code: AMP-JL-RD800/6
Stock code: AMP-JL-RD900/5
Stock code: AMP-JL-RD900/5+
Stock code: AMP-REC-600.4
Stock code: BL-P601
Stock code: BL-P704
Stock code: BL-P805Nissan 350Z
Production years 2003 - 2010
The Nissan 350Z have a facelift in 2006 which affects the radio fascia. It is a very minor difference in the fascias needed from the pre facelift to post facelift models.
The easiest way to tell if the car is the older or newer model is to look at the styling around the gear stick and the location of the hazard switch.

In the picture above you can see the different styling around the gear stick and the position change of the hazard switch.
The left image is of the 2003 - 2006 model, the hazard switch is positioned further back near the handbrake, the 2006 - 2010 model on the right has the hazard switch further forward on the dashboard located between the gear stick and below the climate controls.
Bose integration.
Most 350Z cars have factory fitted Bose audio systems. New equipment like head units and handsfree kits can be easily added to this system using high to low level adapters. The original head unit supplies the audio to the amplifier via a low level signal.
When fitting a new head unit, sometimes the audio sounds quieter than expected, this is normally caused by the new head unit having 2V preouts. Head units with 4V preouts will provide better audio. Another way to get better audio is to use an adapter lead for a non amplified car, use the ISO speaker outputs from the head unit and run the audio through a high to low level interface, this will give the best audio quality.
The Bose amplifier is turned on by a 12V switch signal.
This diagram shows the position of the amplifier turn on (AMP ON) pin. Use the 12V switch output from the new head unit (blue/white wire) to turn the amp on.
Go to the checkout or continue browsing the site?
We will despatch it when stock arrives. Do you still want to order?
This is a special order item. For availability please email orders@incartec.co.uk.
We will despatch it when stock arrives. Do you still want to order?
There is a maximum quantity of 5 items per product and you've reached this limit.
If you'd like to discuss this, please contact orders@incartec.co.uk.
© Copyright 2026 InCarTec. All Rights Reserved