Blue female Fakra to male SMB DAB antenna adapter cable (25cm/ 250mm)

Can be used to connect DAB devices  with Fakra connectors ( Pure Highway 300 or Alpine Ezi Dab) to alternative external antenna that have SMB connectors.

Male SMA screw fit to male SMB DAB antenna adapter cable (50cm)

Use this antenna adapter to add a DAB antenna with SMB connector to a DAB device with a SMA connector.

Male Fakra to male SMA screw fit DAB antenna adapter cable (25cm)

Compatible with Car GPS Navigation; Car Stereo FM AM Radio; Sirius XM Satellite Radio; DAB Digital Radio; 4G LTE Telematics.

RG174 Coaxial cable

Female Fakra to female SMB DAB antenna adapter cable (50cm)

Often used to connect Fakra connectors to DAB devices.

This aerial adapter lead can be used when installing a new car aerial where different connectors are required.

It has a female SMB connector at one end and a female Fakra connector at the opposite end.

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)

PLEASE NOTE: For a bulk pack of 10, please use 21-037B

Bulk pack of 10 Fakra DAB male to DAB SMB female antenna adapter cables (50cm)

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)

Bulk pack of 10 Double Fakra to Male DIN aerial antenna adapter cables (With 12v phantom power)

This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Isuzu D-Max antenna adapter to retain the original FM and DAB antennas. For 2021 onward (facelift) vehicles with amplified antenna. 
Also fits some later model Mazda, Honda and Suzuki cars without a separate DAB module and a combined FM and DAB antenna connection.

Isuzu D Max (2021>)

Spare nut kit for 70-914 DAB/ AM/ FM Combiflex roof antennas.

Only to be used with our 70-914 combiflex roof antennas

Spare nut and washer kit for 70-915K GPS/ DAB/ AM and FM Combiflex roof antennas

Only to be used with our 70-915K combiflex roof antennas

Roof mounted shark fin aerial antenna for DAB+, FM and AM.

Top quality OEM German made Shark Fin antenna designed for DAB Digital Radio and AM/FM in various vehicles and car models.

Can be fitted as a replacement or a complete new antenna. 20dB DAB and FM amplification.

Can be mounted in new Mercedes and Audi vehicle using adapter seals (Sold separately)

PLEASE NOTE: This antenna does not pick up MW or LW

Seal adapter to fit DAB Shark Fin antenna to Mercedes cars

Spare nut and washer kit for 70-917K and 70-918K aftermarket Shark Fin aerial antennas

Only to be used with our 70-917K and 70-918K shark fin aerial antennas

Seal adapter to fit DAB Shark Fin antenna to VW and Audi cars

Upgrade your car's audio experience with our interior windscreen glass mount DAB radio antenna aerial, designed specifically for aftermarket DAB car radios. This high-quality antenna features a robust 3-meter cable, terminated with a convenient female SMB right angle connector, ensuring a secure fit and outstanding signal reception. The 'sticky-back' peel design allows for easy installation on your vehicle's windscreen, making it a hassle-free addition to your setup. Enjoy crystal-clear digital radio stations and take your driving experience to the next level with this stylish and efficient antenna solution. Embrace the future of car audio today!

PLEASE NOTE: For a bulk pack of 5, please use 70-923B

Interior windscreen glass mount DAB radio antenna aerial suitable for aftermarket DAB car radios.

Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.

PLEASE NOTE: For a bulk pack of 5, please use 70-923B

The InCarTec 70-923B is a bulk pack of 5 interior glass-mount active DAB aerials, designed for mounting inside vehicle windscreens. Each aerial includes a 3 m cable terminated in a female right-angle SMB connector and features a low-profile adhesive backing that sticks directly to the glass. This pack is ideal for installers, wholesalers or for multi-vehicle fleets needing multiple units at once.

The InCarTec 70-923-BOX is a bulk box of 10 interior glass-mount active DAB aerials, designed for mounting inside vehicle windscreens. Each aerial features a 3m cable terminated with a female right-angle SMB connector and a low-profile adhesive backing for easy glass installation. This box is ideal for installers, fleets, or businesses needing multiple units for several vehicles at once.

External adhesive glass mount active DAB car aerial antenna whip (With 15db gain)

This top quality OEM German made aerial whip has a high 15db gain and a separate 12V feed. This antenna is designed for a 12V phantom feed supplied by the DAB source up the centre of the coaxial cable.

If using with a DAB device with a switchable 12v phantom feed down the coaxial cable make sure that this is switched ON. 

For best performance this antenna should be mounted at least 5mm between antenna and the vehicle body.

PLEASE NOTE: Avoid mounting the antenna in areas which have heated glass screens or tinted glass

DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.

This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

For a bulk pack of 5, please use 70-928B

Bulk pack of 5 DIN to DAB & FM antenna aerial amplifier splitters

This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

Roof mounted shark fin aerial antenna for DAB+, FM and AM.

Top quality OEM made Shark Fin antenna designed for DAB Digital Radio and AM/FM in various vehicles and car models.

Can be fitted as a replacement or a complete new antenna.

Comes with a 5m SMA, SMB and Fakra cable set

PLEASE NOTE: This antenna does not pick up MW or LW

AM/ FM/ DAB/ DAB+ passive high performance combiflex adjustable roof mount antenna aerial 

This top quality OEM German made combiflex roof antenna establishes reliable, powerful radio connections in the area of ??broadcasting and is suitable for mobile use outdoors (on the roof or side).

With an adjustable whip angle from 10 to 115° and minimal 15mm installation depth, this passive high performance antenna is suitable for AM, FM, DAB and DAB+ 

PLEASE NOTE: If using for both FM and DAB please use with our 70-926 splitter amplifier

Passive DAB/ DAB+ / DVB-T antenna splitter/diplexer designed to be used with combi flex roof mount antennas.

This top quality OEM German made passive antenna splitter divides the input signal into several frequency ranges or communication services. Including DAB/DAB+ and DVB-T.

Suitable for vehicle and house interiors, the splitter allows the division of digital radio DAB/DAB+ and digital television DVB-T. The phantom power from the DVB-T tuner is passed through to the antenna.

This universal amplified glass mount aerial is a discreet adhesive antenna that boosts FM radio reception. Designed for easy installation on smooth interior surfaces including glass, wood, plastic, and tempered fibreglass, it's ideal for cars, motorhomes, caravans, and commercial vehicles. Includes integrated amplifier and 1.4m DIN signal/power cable.

Roof mount DAB digital radio and AM/FM car radio antenna.

The antenna has a built in amplifier, this gives 10dB signal gain for high performance. A separate +12v power supply needs to be supplied to turn on the signal amplifier.

70° whip angle.

5 metre cables are included.

One wire is a single wire for the amplifier turn on power supply, the antenna cable for AM/FM has a standard aftermarket DIN antenna connection, the DAB antenna cable has a standard aftermarket DAB SMB connector.

This active DIN to DAB and FM antenna splitter allows you to receive AM/FM and DAB digital radio signals through your existing car antenna. It enables you to upgrade to a DAB aftermarket radio without installing an extra DAB antenna. Perfect for aftermarket head unit installations, this plug-and-play adapter maintains full FM and DAB reception, providing clear, interference-free signals without cutting or modifying your factory wiring. Ideal for DIY enthusiasts and professional installers.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

For a bulk pack of 5, please use 70-965B

This pack of 5 DIN to DAB & FM antenna aerial splitters allow you to convert your vehicle’s existing FM aerial into a combined FM + DAB reception system. This 12 V powered adapter splits your FM antenna feed, amplifies it for FM band, and extracts a DAB signal via SMB connector—perfect for installing a DAB radio without changing your original antenna.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

These box of 10 DIN to DAB & FM antenna aerial splitters allow you to convert your vehicle’s existing FM aerial into a combined FM + DAB reception system. This 12 V powered adapter splits your FM antenna feed, amplifies it for FM band, and extracts a DAB signal via SMB connector—perfect for installing a DAB radio without changing your original antenna.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas