Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.

This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.

RECOIL Universal amplifier level remote controller with Built-in Digital Voltmeter, Blue LED Display, Remote Gain Control and On/Off Switch.

• Dash-mount amplifier level control for volume adjustment
• Adjust the bass level even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Rotary push turn ON/OFF switch for a voltmeter (10V ~ 15.9V)
• Blue LED display (high voltage / low voltage)

RECOIL Tweeter Bass Blockers/ Filters/ Capacitors designed for 3.5" (86mm) speakers

• Protects car audio 3.5” speakers from receiving damaging frequencies.
• Frequencies blocked:  4 ohms: 0-2800 Hz / 8 ohms: 0-1400 Hz
• Easily handles power of up to 50 watts.
• Red color-coded leads for easy identification. Encased with wire leads for easy installation.
• Designed to enhance the performance and power handling of tweeters by removing frequencies beyond their capabilities.

RECOIL Tweeter Bass Blockers/ Filter/ Capacitors (PAIR) Approximate Crossover Power - 5.6 kHz at 4 Ohms

• Protects car audio tweeters from receiving damaging frequencies.
• Frequencies blocked:  4 ohms: 0-5600 Hz / 8 ohms: 0-2800 Hz
• Easily handles power of up to 50 watts.
• Black color-coded leads for easy identification. Encased with wire leads for easy installation.
• Designed to enhance the performance and power handling of tweeters by removing frequencies beyond their capabilities.

The MGLI Super Mini 2-Channel RCA Stereo Ground Loop Isolator is designed to eliminate ground loop noise, hum, and alternator “whine” between your audio source and car radio. Built using HiFi permalloy transformers, it ensures crystal-clear sound with minimal signal loss. Ideal for car audio systems, factory amp integration, and AUX input setups, it removes pops, clicks, and ignition ticking while maintaining full frequency response. Compact and installer-friendly, this isolator provides a secure fit and easy inline installation for professional, noise-free results.

PLEASE NOTE: For a bulk pack of 10, please use 24-020B

This RECOIL Mini-ANL inline fuse holder is designed for 4–8 AWG car audio power wiring, ideal for protecting amplifier installations and high-current electrical circuits. It accepts Mini-ANL fuses from 60A to 100A and includes forged brass terminals, a marine-grade satin chrome finish, and a high-temperature polycarbonate housing. Easy to install and perfect for both professional and DIY car audio setups.

The RECOIL Mini-ANL 2-Way Inline Fuse Holder distributes power safely for car audio and amplifier setups. Supports 1×0/2/4?AWG input and 2×4/8?AWG outputs, with 2×60A, 2×80A, 2×100A Mini-ANL fuses for flexible protection. Forged brass terminals ensure maximum power transfer, while the marine-grade chrome finish and high-temperature polycarbonate base provide corrosion resistance and insulation. Easily branch your main power wire to connect multiple amplifiers, delivering a clean, professional, and safe installation.

The RECOIL True Spec 8-Gauge 2-Channel Amplifier Wiring Kit includes everything needed for a clean, safe car audio installation. Features 17?ft premium frosted blue 8?AWG CCA power wire, 3?ft black 8?AWG CCA ground wire, 17?ft OFC 2-channel RCA interconnect, 17?ft 18?AWG remote turn-on lead, and a Mini-ANL fuse-holder with 80?A fuse. Kit also includes a firewall grommet, four nickel-plated ring terminals, one red butt connector, and ten zip ties — ideal for powering 2-channel amplifiers safely and professionally.

The RECOIL 4-Gauge 2-Channel Amplifier power Installation Kit provides everything needed for a professional, high-current car audio setup. Includes 17?ft OFC 2-channel RCA interconnect, 17?ft blue 4?AWG power wire, 3?ft black 4?AWG ground wire, 17?ft 18?AWG remote turn-on lead, and 25?ft 16?AWG speaker wire. Kit also contains a Mini-ANL fuse-holder with 120?A fuse, firewall grommet, nickel-plated ring terminals, spade terminals, butt connector, and zip ties — perfect for powering 2-channel amplifiers safely and professionally.

RECOIL 8 AWG (10mm2) ring terminals with red/black heat shrink (10mm HOLE) 10 PACK

• Bolt Mouth Size: 10.4mm / 0.41" (D);Fit Cable Size: 10mm2 / 8AWG
• Widely used for household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment.
• Pure copper lugs with strong durability,99.9% purple copper structure for excellent conductivity.
• Comes with dual wall adhesive heat shrink tubing (5 red+ 5 black)

RECOIL 8 AWG (10mm2) ring terminals with red/black heat shrink (8mm HOLE) 10 PACK

• Bolt Mouth Size: 8.4mm / 0.33" (D);Fit Cable Size: 10mm2 / 8AWG
• Widely used for household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment.
• Pure copper lugs with strong durability,99.9% purple copper structure for excellent conductivity.
• Comes with dual wall adhesive heat shrink tubing (5 red+ 5 black)

RECOIL 4 AWG (25mm2) ring terminals with red/black heat shrink (10mm HOLE) 10 PACK

• Bolt Mouth Size: 10.4mm / 0.41" (D);Fit Cable Size: 25mm2 / 4AWG
• Widely used for household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment.
• Pure copper lugs with strong durability,99.9% purple copper structure for excellent conductivity.
• Comes with dual wall adhesive heat shrink tubing (5 red+ 5 black)

RECOIL 4 AWG (25mm2) ring terminals with red/black heat shrink (8mm HOLE) 10 PACK

• Bolt Mouth Size: 8.4mm / 0.33" (D);Fit Cable Size: 25mm2 / 4AWG
• Widely used for household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment.
• Pure copper lugs with strong durability,99.9% purple copper structure for excellent conductivity.
• Comes with dual wall adhesive heat shrink tubing (5 red+ 5 black)

50PCS Heat Shrink Butt Connectors 16-14 AWG (1.5 - 2.5 mm2) Blue Butt Splices Terminals

• High Quality Tinned Copper Core-Heat shrinking connector copper core uses tinned copper, which is easier to flatten and grasp the wires, to enhance electrical conductivity.
• The connector shell is made of high-quality polyolefin and will not break the insulation layer when being pressed
• Connector contains sufficient hot melt adhesive, generating more adhesive to wrap the wires during use.
• Easy to use and operate in the compressing process, making suitable for DIY installations.

Multicore speaker cable

1mm2 (18 AWG) Color Coded Car Speaker Cable.

Eight Speaker Leads and one Remote Turn-on Lead

Easy Peel Jacket without Cutting Through Inner Wire Jacket.

EIA Standard Color-coded for Quick and Easy Installation

High-Strand for Increased Sound Transfer

6 Metre Length is Ideal for 4-Speaker to Amplifier Installation

Save Installation Time - Only One Cable to Run.Ultra-Flex Outer Jacket for Maximum Flexibility

Length: 6 Metres