Interfaces for adding front and rear camera's to cars OEM system
5 metre Single male to male Phono/RCA video extension cable
Cable colour: Black
Connection: 2 x male Phono plug
Length: 5 metres
Alpine Camera adapter from RCA to Alpine direct connection
This camera adapter allows you to connect any kind of 3rd party camera with RCA connector to an Alpine system with Alpine Direct Camera Input.
This power relay cable is to be used when installing a camera into a vehicle.
Sometimes a reverse power feed from a reverse light may not be strong enough to power a camera or may create interference.
This relay can use a weak reverse trigger to switch on a better 12v power feed for a camera or reduce interference.
Requires hardwiring.
Allows you to add an aftermarket camera to the OEM screen on a Mercedes factory fitted head unit.
PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported. NTSC only
You will need to code the head unit for camera input.
10 metre Single male to male Phono/RCA video extension cable
Cable colour: Black
Connection: 2 x male Phono plug
Length: 10 metres
Reverse camera adapter lead for Suzuki cars. Add an aftermarket reverse camera to a Suzuki car with original navigation head units.
Reverse camera adapter lead for Clarion NX504E, NX503E and FX503E head units.
Add an aftermarket reverse camera to the original media head unit.
Reverse camera adapter lead for Iveco Daily vans fitted with original IVEConnect media head units.
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Mazda car models (Display and navigation model radios only).
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
This camera cable allows you to add an aftermarket rear view camera to the 5 inch factory radio screen on select Honda Civic, CR-V and Jazz models (2016 Onwards) car models.
The 32 Pin connector on this cable connects to the back of the factory Honda radio which upon reverse gear will display a rear camera image on the 5 inch screen.
Only suitable for Honda Civic (S/SE Models) CR-V (S-Models) and Jazz (S-Models) from 2017 Onwards.
PLEASE SEE PRODUCT IMAGES FOR COMPATIBLE RADIOS
15 metre Single male to male Phono/RCA video extension cable
Cable colour: Black
Connection: 2 x male Phono plug
Length: 15 metres
Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).
PLEASE NOTE: If adding an aftermarket camera to the original system please use part number 27-249
8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on various Subaru models from 2008-2015.
Fits cars with original Kenwood navigation or car with the 4.3" screen and navigation
8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on Toyota/ Citroen and Peugeot cars with X-Touch/ X-Nav systems.
Adapter to add a reverse view camera to various Renault and Dacia vehicles with MEDIA Nav screen head units.
NOT Suitable for R Link 1 and R Link 2 systems
The camera input may need to be activated by a dealer.
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars with a factory fitted navigation system.
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars without factory fitted navigation systems.
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
This adapter cable allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
Suitable on select Subaru (2015 Onwards) car models with original 6.2 inch basic screen.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Camera interface cable allowing you to add a reverse Camera to select Mazda (2014 Onwards) car models with factory fit 7 inch MZD Connect Screen based systems.
This cable allows you to add an aftermarket back-up NTSC camera to the Mazda MZD connect original screen
Suitable for various Mazda cars 2014 onwards with original 7" MZD Connect monitor and 28 pin connector.
PLEASE NOTE: Additional programming may be required to activate the rear view camera option on some vehicles
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Nissan (2015 Onwards) cars with a 4.3 inch factory colour display and 32 PIN connection behind the screen.
PLEASE NOTE: Not suitable for Nissan car models with 360 degree Birds Eye view camera systems
28 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors MFD GEN5.
Suits Toyota Land Cruiser 200 (07-09) and various Lexus models GS, LS,(07-09) , IS250 and 350 from (06-09)
This 32 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan models with Nissan Audio multimedia systems (WITHOUT NAVIGATION)
This cable will allow you to add an aftermarket camera to OEM Honda navigation systems which have a green 7 PIN connection on the back of the head unit .
Suits Honda 2VNO navigation units (with green 7 PIN connection)
Reverse Camera interface adaptor for factory Ford SYNC 2.5 / SYNC 3 systems (version 3.0 / 3.2 / 3.3) with 7 or 8 inch monitor screen and new 32-PIN Ford connector
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings.
Disconnect the factory connector and connect our T-Harness inline.
PLEASE NOTE: Coding is required with Forscan to enable RVC function on Sync systems
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota car models with 24 (9+15) Pin connector (Display and navigation model radios only).
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota (2012 Onwards) car models (Display and navigation model radios only).
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems.
40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.
PLEASE NOTE: Only suitable for NTSC cameras
24 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Honda cars with OEM Honda i-MID 8" and touch screen Monitors.
This plug & play cable kit allows you to retrofit an aftermarket rear view camera to the factory infotainment system in select Dacia models, including the Duster II (from 01/2021), Jogger (from 03/2022), and Sandero III (from 01/2021). It supports NTSC rear view cameras with RCA (CVBS) connectors and enables seamless integration without modifying the vehicle’s original wiring.
PLEASE NOTE: Coding may be required to activate the rear view camera input if not already enabled from the factory, ensuring full functionality through the original screen.
Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Grey Connectors)
Conversion Kit for campers/ campervans which have the dometic video cable pre-installed from factory but wish to use a Pioneer camera and/or head unit.
Compatible with the dometic shadow grey connectors.
Pioneer Part Number: CA-BC-WAE.002
Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Blue Connectors)
Conversion Kit for campers/ campervans which have the dometic video cable pre-installed from factory but wish to use a Pioneer camera and/or head unit.
Compatible with the dometic water blue connectors.
Pioneer Part Number: CA-BC-WAE.001
40 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan Leaf cars with OEM Nissan EV GEN1 and EV GEN2 multimedia systems.
Add a reverse view NTSC camera to select Volkswagen vehicle models with Composition Media/Discover Media (MIB STD2 PQ/+NAV) systems.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit. This harness has a built in interface to give ignition power and a reverse feed to the camera.
PLEASE NOTE: The camera input function needs to be CODED to the car by either a VW dealer or a specialist engineer with VCDS.
Add a reverse view NTSC camera to select Volkswagen vehicle models with factory OPS, MIB/MIB2, High/Discovery Pro and Standard/Composition Media, 5.8 inch, 6.5 inch, 8 inch or 9.2 inch monitor.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit. This harness has a built in interface to give ignition power and a reverse feed to the camera.
PLEASE NOTE: The camera input function needs to be CODED to the car by either a VW dealer or a specialist engineer with VCDS.
Add a reverse view NTSC camera to select Seat car models with MIB/MIB2 High/Standard Navigation system Plus or Media System Plus 6.5 inch or 8 inch monitor.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit. This harness has a built in interface to give ignition power and a reverse feed to the camera.
PLEASE NOTE: The camera input function needs to be CODED to the car by either a VW dealer or a specialist engineer with VCDS.
Add a reverse view NTSC camera to select Skoda car models with factory OPS, MIB/MIB2. High/Columbus and Standard/Bolero/Amundsen with 5.8 inch, 6.5 inch, 8 inch or 9.2 inch monitor.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit. This harness has a built in interface to give ignition power and a reverse feed to the camera.
PLEASE NOTE: The camera input function needs to be CODED to the car by either a VW dealer or a specialist engineer with VCDS.
This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.
PLEASE NOTE: Only suitable for 59 pin and 16 pin connection
ES series cars of 2012-2018 MY are not supported!
Plug and Play cable to add an NTSC reverse view camera to Renault and Nissan vehicles with EasyLink 8" head-units
Nissan Primastar 08/21 on , Renault Express Van, Kangoo, Master, Trafic Rapid 05/2021 onwards.
The camera input coding will need to be activated by a dealer if not already enabled at factory.
Reverse camera to RGB video input interface for VW cars with RNS315, RNS510 or RCD510 original head units.
Only for NTSC camera's. CODING NEEDED BY VW ENGINEER WITH DIAGNOSTIC TOOL
The CAM-FT1-RT is a plug-and-play camera retention lead designed for Fiat Ducato Series 8 (2021+). It allows you to keep the factory-fitted reversing camera fully functional when replacing the original radio with an aftermarket head unit. Easy to install, the interface connects directly to the vehicle’s existing camera wiring, supporting both AHD and CVBS video signals for seamless integration and continued rear-view visibility.
Add a reverse view NTSC camera to select Mercedes Benz Vito and Viano W447 (2015-2022) vehicles fitted with original Audio 15 head units.
This plug-and-play "T" Harness is the perfect integration into the original equipment, allowing you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) while retaining factory settings.
PLEASE NOTE: Please check that the connections and specifications match the vehicle it is to be fitted to.
Camera interface allowing you to add an aftermarket camera whilst retaining the use of your factory head unit on select BMW X5 E71(2006-2013) and BMW X6 E70 (2008-2014) car models with factory fitted CCC navigation systems.
Designed for use on vehicles without a factory camera input, this interface allows the camera image to be automatically viewed via reverse gear or manually through the vehicle’s controls.
PLEASE NOTE: Please check that the connections and specifications match the vehicle it is to be fitted to.
Add rear and front cameras to the OEM monitor of select Audi group cars with MMI 3G+ High
NOT suitable for MMI3G low/ basic
For Audi A6L/A7/A8L 2012-2016, VW Touareg 8" Navigation screen
Harness is fitted at the front behind the head-unit and in the rear boot area to the parking control module.
This interface allows you to add rear and front cameras to the OEM monitor of select Audi group cars with MIB2, Porsche cars with PCM 4.0 or PCM 4.1 and Volkswagen vehicles with composition Media or Discover Pro systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected.
Add a rear parking camera to the Original screen on select Peugeot and Citroen 2023 Onwards vehicle with 10 Inch Touchscreen systems. Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.
PLEASE NOTE: This interface is designed for Citroen/ Peugeot 2023 Onwards vehicles with 10 Inch touchscreen systems and 12 Pin connections at the back of the radio module. Please confirm compatibility before purchasing!
Camera interface allowing you to add a reverse view NTSC to the original factory radio screen on select Discovery 4 and Range Rover Sport (2009-2011) car models with with 2nd generation touch screen navigation.
This interface has built in video in Motion software, enabling built in DVD and TV picture to be viewed whilst on the move. Ideal for passengers.
This system will provide a reverse camera input that is activated when reverse gear is engaged. If the vehicle has the Optical Park Sensor display on the factory screen, this will also be maintained.
Add a reverse view NTSC camera to select Land Rover car models (3rd Gen 8.2 Inch navigation systems) with this plug and play camera interface.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit on select Land Rover car models with 3nd generation 8.2" touch screen navigation and In Control Touch Pro (For specific models please view Vehicle applications). This system is specifically designed for use on vehicles without a factory camera input.
Add a reverse view NTSC camera to select Land Rover (2015-2016) car models (4th Gen 8 Inch navigation systems) with this plug and play camera interface.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit on select Land Rover (2015-06/2016) car models with 4th generation 8" touch screen navigation and In Control Touch Pro (For specific models please view Vehicle applications). This system is specifically designed for use on vehicles without a factory camera input.
Add a reverse view NTSC camera to select Land Rover and Jaguar (2017 Onwards) with InControl Touch 8 Inch Screens with this plug and play camera interface.
This interface is a camera add on kit which allows you to add an aftermarket rear view camera whilst retaining the use of your factory head unit on select Land Rover and Jaguar (2017 Onwards) with InControl Touch 8 Inch Screens (For specific models please view Vehicle applications). This system is specifically designed for use on vehicles without a factory camera input.
Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia cars with Uconnect head units and separate 8.4 inch monitors.
This interface allows for the connection of a rear-view camera to the cars factory navigation system. Only compatible for cars with Uconnect 5 inch or 8.4/ RB5 and 8.4/ RE2 system monitors with 22 pin connector.
PLEASE NOTE: Please check that the connections and specifications match the vehicle it is to be fitted to.
Rear view camera input interface for Chrysler, Dodge, Jeep cars with Uconnect head units and separate 8.4 inch monitors.
This interface allows for the connection of a rear-view camera to the cars factory navigation system. Only compatible for cars with Uconnect 5 inch or 8.4AN/ RA4 and 8.4A/ RA3, 5.0 system monitors with 52 pin connector.
PLEASE NOTE: Please check that the connections and specifications match the vehicle it is to be fitted to.
This interface allows you to add a rear and front camera to the OEM monitor of an Audi car without a MMI system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens.
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Add a rear parking camera to the Original screen on select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC High or Low navigation Touch screen monitor.
This interface allows you to connect a reverse camera to the original factory fitted touch screen and display a rear view camera image upon putting the vehicle into reverse gear.
Please note: This interface is designed for select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC Touch screen
This interface allows you to add rear camera to the OEM monitor of select Audi cars with MIB3 multimedia
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Connects at the head-unit control module beneath glove box
Fits Audi A4/A5/Q5 (2021 facelift upwards) Audi A3 (2021 on), Audi Q3 (2022 on)
Add a rear parking camera to the Original screen on select Peugeot and Citroen cars with NAC high or low navigation Touch screen monitors. Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.
Please note: This interface is designed for Citroen/ Peugeot vehicles with a 9 ,10 or 12 inch NAC Touch screen
For 7 or 8 Inch NAC touch Screen, please use 27-563
This interface allows you to add rear and front backup and parking cameras to the OEM monitor of select Mercedes car models (WITH NTG 5.5/ NTG6 MBUX)
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician
Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.
Add a rear parking camera to the Original screen on select Volkswagen T-Cross vehicle models with a Discover Media system.
The interface included in this kit allows you to add a rear camera to the OEM monitor on select Volkswagen T-Cross car models. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This integration kit also comes complete with a tailgate handle camera which secures into the place of the original tailgate handle housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with original NTG5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with Command APS NTG 4.5. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add a rear and front camera to the OEM monitor of a 2014 to 2017 onward Volvo car with Sensus technology.
ONLY FOR CARS WITH NAVIGATION AND GLOBE SYMBOL ON RADIO
It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This interface allows you to add rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Connects at the head-unit control module beneath glove box
Compatible with Vauxhall , Opel, Chevrolet and Buik CD500, DVD600/800/900, CD600 Intellilink and DVD950 Intellilink infotainment systems.
Atra J, GTc, Insignia A, MerivaB, Mokka A and other vehicles model year 2012-2013
Front and rear view camera and video input interface.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
PCB Insertion needed between the head-unit and the Monitor . NOT suitable for DIY users
PLEASE CHECK LONG DESCRIPTION NOTES FOR COMPATIBILITY
Extra PCB insertion required into original radio .
Only Suitable for Mini 6.5inch basic EVO BIS radio with all-in-one radio behind screen
the BIS radio has a 42 pin rectangular connector rather than the standard 40 pin that is in the EVO systems and NBT systems
PLEASE NOTE: not recommended for DIY . Experienced engineers only.
Rear view camera and video input interface for Vauxhall/Opel models with R4.0 IntelliLink system and 7" Monitor with Radio DIN-cage attached to it. (all in one units)
This NOT plug and play as a new PCB needs to be attached to the existing radio. Not for models with a separate screen away from the radio module.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Rear view camera and video input interface suitable for various Alfa Romeo, Citroen, Dodge and Fiat vehicles with Uconnect 5 VP2/ RA2 with DIN housing behind the front panel and 5 inch monitor . This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
PLEASE NOTE: Only Suitable for Uconnect 5 VP2/RA2 systems with CD-drive and DIN-shell behind front-panel
Front/ Rear view camera and video input interface suitable for various Fiat 500, 500L and 500X car models with Uconnect LIVE HD + Nav LIVE HD with 7 inch monitor (VP2-312-7in + VP2-334-7in) . This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
PLEASE NOTE: Only Suitable for models with Uconnect LIVE HD and Nav LIVE HD with 7 inch monitor
Front/ Rear view camera and video input interface suitable for select Chrysler and Dodge car models with Uconnect 4 UAG systems with 7 inch monitor. This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system.
PLEASE NOTE: Only Suitable for models with Uconnect 4 UAG systems with 7 inch monitor
This camera interface allows you to add a rear and/or front view camera to the existing OEM monitor. Suitable for BMW cars with NBT Navigation on a 6.5, 8.8 or 10.25 inch OEM monitor.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Suitable for MINI cars made between 2013 and 2016 with cars with NBT Navigation on a 6.5 or 8inch screen
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Add front and /or rear camera to the original screen on Mercedes Sprinter vehicles 2018 onwards with MBUX NTG6 system with a 7 inch screen with Original navigation
Only suitable for Mercedes vehicles with a 7 inch screen with satellite navigation. The connector behind the radio is 26-pin
DOES NOT show original PDC ( Park distance control ) when camera is engaged
NOT SUITABLE FOR 10 inch screen systems
This interface allows you to add a reversing camera to the factory Mercedes Sprinter 2018-onwards MBUX 7-inch system (without navigation). It integrates seamlessly with the OEM display, enabling safe and reliable use of an aftermarket or factory-style camera. Designed specifically for MBUX, the system activates automatically when reversing and provides a clear, wide-angle view of the rear of your vehicle. Ideal for commercial vans, delivery drivers, and tradespeople who need improved visibility and safety when parking or maneuvering.
PLEASE NOTE: Only suitable for Mercedes vehicles with a 7 inch screen without satellite navigation. The connector behind the radio is 31-pin
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
Rear view camera input interface for select Dodge and Jeep cars with 8.4 inch Uconnect (UCON8-CP) head units
This interface allows for the connection of a reverse rear-view camera to the cars factory system. Only compatible for cars with Uconnect 8.4 inch (UCON-8CP) systems originally manufactured by Panasonic.
PLEASE NOTE: Please check that the connections and specifications match the vehicle it is to be fitted to.
Rear view camera and video input interface for Vauxhall/Opel models with R4.0 IntelliLink system and 7" Monitor with separate radio module
Astra K (Sports Tourer and 5 door models) 2016-2019, Insignia B (2017-06/2018) Karl up to 03/2018, Chevrolet Camaro 2016 on.
Not suitable for models with all in one radio and monitor. Use item 27-565 for these.
PLEASE CHECK LONG DESCRIPTION NOTES
This camera interface allows you to add a rear and/or front camera to the OEM monitor of a Mercedes car with original NTG5.5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Only suitable for Mercedes cars with original NTG 5.5 audio systems with either a 10.2 or 12.3 inch monitor
Front and rear view camera and video input interface for various Land Rover models with GVIF technology/ touch screen navigation version 1 and 1.1. This interface allows for rear-view camera input and two additional video sources.
PLEASE NOTE: Only suitable for vehicles with factory navigation
THIS INTERFACE ONLY WORKS WITH NAVIGATION SWITCHED ON
Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Buick LaCrosse and Regal car models with factory fitted CD500/ DVD800 systems.
PLEASE NOTE: Only suitable for vehicles with factory navigation switched on
Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Vauxhall Astra J, Insignia A and Meriva B car models with factory fitted CD500/ DVD800 systems.
PLEASE NOTE: Only suitable for vehicles with factory navigation switched on
Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Jaguar XF (X250) car models with factory fitted Version 1.1 touch-screen navigation
PLEASE NOTE: The vehicle must be in navigation map view in order to see the reverse camera
If you want to keep the existing screen in your Audi, then our CarPlay Retrofit Unit ticks all the boxes. Compatible with select Audi Q5 (2010-2016) car models with factory MM3G systems, this unit hides behind the centre console and supplies your car with wireless/ wired Apple Car Play and Android Auto. The unit does not replace any of the components of the infotainment system, allowing use of the current system in the car. Switching between CarPlay and the infotainment system is very easy.
CAN BUS reverse switching is ONLY FOR VEHICLES WITH AUTOMATIC GEAR SHIFT
Suitable for Land Rover/ Jaguar models with factory fitted Bosch head units with 8 inch touch screen display. 2012 to 2015.
Jaguar F Type (13-15) Jaguar XF X250 (12-15) Jaguar XJ X351 (10-15)
Landrover Discovery4 L319 (12-14), Freelander 2 L359 (2013 only) Range Rover Vogue L322 ,Sport L320 (facelift) Evoque L358
Upgrade your Land Rover or Jaguar experience with our innovative camera interface designed specifically for models equipped with factory-fitted Harmon head units and an 8-inch display. This cutting-edge solution allows you to seamlessly integrate an aftermarket camera into your original OEM head unit, providing enhanced visibility and safety when reversing or parking. Enjoy crisp, clear images on your display with minimal installation hassle. Transform your driving experience with this essential accessory, ensuring peace of mind on every journey.
Suitable for BMW , MINI cars with NBT2 EVO ID5/ID6 systems on a 6.5, 8.8 or 10.25 inch OEM monitor.
NB. Dynamic parking guidelines are not available for all vehicles. Factory PDC display may not work on all vehicles.
PLEASE SEE LONG DESCRIPTION
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for select BMW cars with ID7/ MGU (Media Graphic Unit) iDrive systems on either a 10.2 or 12.3 inch screen.
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
Suitable for select Ford vehicles 2018 on with 32 pin SQUARE CONNECTOR.
with Sync Connect 4inch or Sync 2.5 (Sync3 light /R5) Tablet version. 6.5/7/8 inch
Normally not for vehicles with Navigation ( these have Sync 3 full version)
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (7-inch screen)
This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (10.25-inch screen)
If you want to keep the existing screen in your Audi, then our CarPlay Retrofit Unit ticks all the boxes. Compatible with select Audi car models with factory Non-MMI systems, this unit hides behind the centre console and supplies your car with wireless/ wired Apple Car Play and Android Auto. The unit does not replace any of the components of the infotainment system, allowing use of the current system in the car. Switching between CarPlay and the infotainment system is very easy.
Add a rear parking camera to the Original screen on select Volkswagen ID3 ID4 ID5 vehicle models with a 10 inch multimedia tablet MIB3 screen monitor.
The interface included in this kit allows you to add a rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
This integration kit also comes complete with a UK & European car number plate/ registration plate frame with built in rear view camera, providing additional visual safety to the back of the vehicle, whilst maintaining its original appearance.
Add camera (S) to OEM system on a select Mercedes vehicles (2019 Onwards) with MBUX NTG6 system with a 7 inch screen without satellite navigation
This interface can be used when adding front, rear and side view cameras to a 2019 onwards Mercedes with MBUX NTG6 such as Mercedes A-Class (W177), B-Class (W247), CLA-Coupe (C118), GLB (X247) and Sprinter(W907/910)
PLEASE NOTE: Only suitable for select Mercedes vehicles (2019 Onwards) with a 7 inch screen without satellite navigation and 31-pin connector
ONLY SUITABLE FOR 2016 Onwards models with RLINK 2
Captur, Clio 2017- 2019, Espace 2016- 2020, Kadjar, Koleos 2016 >,
Master, Megane, Talisman 2016- 2020,Scenic from 10/2016,
PLEASE CHECK LONG DESCRIPTION NOTES
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor.
Only suitable for Discovery 5 and Jaguar E Pace 2016 > with 10" single screen Harman systems (Touch Pro)
FITTED UNDERNEATH DRIVERS OR PASSENGER SEAT
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Add a front and/or rear camera to Porsche cars ( PCM4.1/ PCM5.0/ PCM 6.0 ) navigation systems with this plug and play camera interface.
This interface is a camera add on kit which allows you to add an aftermarket front and/ or rear view camera whilst retaining the use of your factory head unit on select Porsche models with PCM4.1/ PCM5.0/ PCM 6.0 navigation systems (For specific models please view Vehicle applications). This system is specifically designed for use on vehicles without a factory camera input.
Smartphone/ Camera integration designed for Audi Q7 (2012-2015) with MMI 3G+ system (6.5 INCH OEM screen)
PLEASE CHECK LONG DESCRIPTION
Wired Smartphone/ Camera integration designed for Audi cars with OEM MIB II systems with 7 or 8.3 inch screens. The car must have AUX in for this interface to work.
This interface is NOT wireless and needs the smartphone to be connected by USB
The original MIB 2 system consists of the MIB 2 main unit with either a 7/8.3 inch monitor with 4pin LVDS connector.
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration for Audi A6/A7 (2012-2015) with MMI 3G+ Systems (WITH OEM 6.5 INCH SCREEN DISPLAY)
For later facelift models (2016-2018) with MMI 4G+ systems, please use 27-837
PLEASE NOTE: PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
Smartphone/ Camera integration for Audi A8 (2012-2017) with MMI High 3G System (7 INCH OEM screen)
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration designed for Audi A1 (2013-2018) car models with MMI 3G systems.
PLEASE NOTE: This interface requires inserting a PCB Board to the original screen and dismantling the original Audi Radio. This should only be carried out by professional car audio technicians!
PLEASE CHECK LONG DESCRIPTION
Smartphone/ Camera integration for Audi Q3 (2014-2018) car models with MMI 3G+ High Systems (7 INCH SCREEN WITH NAVI)
PLEASE NOTE: This interface installation should only be carried out by professional car audio technicians or an individual with relevant car audio experience
PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!
Smartphone/ Camera integration for Peugeot and Citroen vehicles with SMEG/MRN navigation systems. Features include Carplay, Android Auto and screen mirroring.
PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES
AUDIO IS VIA THE CARS AUX IN SELECTION. The USB can be converted using 24-040 or AUX can be activated by a Mercedes specialist dealer
Smartphone/ Camera integration designed for Mercedes with NTG 4.5 and 4.7 OEM system 2012-2015
PLEASE CHECK LONG DESCRIPTION
Suitable for Actros 2018 and Arocs 2020 vehicles 10.25 inch Monitor 26 pin radio connector without Navigation.
The multimedia cockpit with 10.25inch monitor is available with and without navigation. With navigation always has the 31pin radio connector, without navigation has either the 31pin or a 26pin radio connector. For the version with 31pin radio connector, the interface with the item number 27-588 ( RL4-MBMC) is available including a 31pin plug & play harness.
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
Suitable for Actros 2018 and Arocs 2020 vehicles 10.25 inch Monitor 31 pin normally with Navigation.
The multimedia cockpit with 10.25inch monitor is available with and without navigation. With navigation always has the 31pin radio connector, without navigation has either the 31pin or a 26pin radio connector. For the version with 26pin radio connector, the interface with the item number 27-587 ( RL4-MBMRT) is available including a 26pin plug & play harness.
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for Land Rover cars with dual screen systems (Touch Pro Duo)
PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS
© Copyright 2026 InCarTec. All Rights Reserved
