BLAM LIVE L165C - ACOUSTIC 165mm (6.5 inch) 140W High-fidelity 2-Way coaxial speaker system

The LIVE L165C is a high-quality acoustic coaxial speaker system from BLAM that faithfully reproduces acoustic instruments and vocals for a particularly natural and captivating sound. . It's 6.5 inch (165mm) coaxial system impresses with its rigid and lightweight composite cone and combined with a 28 mm diameter coil gives it dynamism and detail that brings your car audio to life. The special features of the Live L165C include the two 165mm coaxial speakers, the coaxially integrated 25mm tweeters and the integrated high-pass 6dB/octave crossover. As a result, this system offers a more sonorous and richer listening experience.

Product Features

• 2-way high-fidelity coaxial system
• 165 mm woofer
• Max Power 140 W
• Nominal Power 70 W
• Frequency response 55 Hz – 25 kHz
• Sensitivity 92 dB
• Impedance 2 Ω

Composition

2 x L165C Woofers/Speakers

• Woofer 165 mm
• Maximum power 140 W
• Rated power 70 W
• Frequency response 55 Hz – 9 kHz
• Sensitivity 92.8 dB
• Impedance 2 Ω
• Mounting depth 71 mm
• Moulded and machined aluminium saladier – Fiberglass and epoxy resin composite diaphragm – Butyl perimeter suspension
• Spider long life “Conex” – 28 mm coil on kapton support – 80 mm x 15 mm magnetic motor – Thick magnetic circuit (5 mm)

Technical Specifications

• Component Woofer
  
• Max power 140 W
• Nominal power 70 W
• Impedance 2 Ω
• Freq. Response 55 Hz - 25 KHz
• Sensitivity (2,83V/1m) 93.2 dB
• Magnet Ferrite
• Magnet size Ø x h 80 x 15 mm 3.150 ‘’x 0.591 ‘’
• Total driver displacement 0.3 l 0.011 cf
• Weight of one component 0.95 kg 2.103 lb
• Voice coil Ø 28 mm 1.102“
• Voice coil height 11 mm 0.433“
• Cone Glass fiber

Technical Parameters

• effective Ø (d) 10 mm
  
• Sd 132.73 cm2
• Xmax 3 mm
• Re 2 Ω
• Fs 65.85 Hz
• Le 10.07 µH @ 1 kHz
• Le 25974.02 µH @10 kHz
• Vas 8.89 L
• Mms 16.25 g
• Cms 0.000359 m/N
• BL 4.21 Tm
• Qts 0.68
• Qes 0.76
• Qms 6.45
• Sensitivity (dB/W/m) 87.2 dB

Supplied Accessories

• Mounting screws
• User manual

Technical Specifications Sheet

Dimensions

You might also require (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
• Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
• Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
• Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion. 
• Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.