Audi A3/S3/RS3 (06–13) Fitting Kit for Pioneer SPH-PF97BT car stereo (SWC/ Fully Amplified)

Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Audi Quadlock Steering wheel control interface with amplifier turn on 

Car audio and steering wheel control interface for Audi cars that have quadlock connectors behind the radio and have fully amplified BOSE audio systems.This CANbus steering wheel control interface will allow you to retain the use of the steering wheel audio controls.

Gives volume, seek, source, and telephone commands to an after market radio.

The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the car.

The CANbus interface will generate an ignition power supply to the new radio, via the red wire. it will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black)

PLEASE NOTE: This interface provides a CAN signal to switch on the amplifier

Pioneer patch lead for steering control interface

Connects the Pioneer SPH-PF97BT to the steering wheel control adapter.

9” Fascia Adapter Panel

Designed specifically for the Audi A3/S3/RS3 (2006–2013), this fascia is engineered for a simple, seamless installation of the Pioneer 9” stereo. Built as a bespoke fit for vehicles in the application list, it adapts the dashboard aperture after removing the factory stereo to accept a universally mounted 4-screw head unit. This ensures compatibility with most aftermarket stereos while retaining the original OEM-style appearance of the dashboard.

This fitting kit is often Purchased With:

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.