BLAM Signature 165 S80 165mm (6.5 inch) 120W 2-way component car audio speakers

The BLAM KIT 165 S80 is designed to deliver crisp, powerful midbass and smooth highs in your car audio system. Featuring two 165 mm S6.80 woofers with ultra-rigid carbon fiber cones and 28 mm voice coils, and two 20 mm T20HR tweeters with textile domes and neodymium magnets, this car speaker kit provides rich, detailed sound. The included BFT01/BFW01 passive crossovers offer a 6 dB/oct high-pass filter and tweeter-level adjustment, allowing tailored tonal balance. Supplied globally by InCarTec, the UK distributor of BLAM Audio, and chosen by top car audio installers and retailers. 

Key Features:

• 165 mm S6.80 woofers (carbon fiber cones, 28 mm voice coil) – 60 W RMS / 120 W max, 60 Hz–7 kHz, 2 Ω
• 20 mm T20HR tweeters – textile dome, neodymium magnet, ferrofluid cooling, high-frequency detail up to 43 kHz
• BFT01/BFW01 passive crossovers – 6 dB/oct high-pass filter with tweeter level selectable (0 dB/–3 dB)
• Die-cast aluminium baskets, long-life spiders, machined pole pieces, gold-plated terminals
• Balanced, immersive performance for premium car audio installations
• Supplied worldwide by InCarTec, the UK’s distributor of BLAM Audio

Composition

2 X S 6.80 HIGH SENSITIVITY WOOFERS

• 165mm Woofer/ Speakers
  
• Max power 120 W / Nominal power 60 W
• Frequency response 60 Hz – 7 kHz
• Sensitivity 94.3 dB
• Impedance 2 Ω
• Mounting depth 73.8 mm
• Die cast aluminium basket
• Ultra rigid carbon fiber membrane
• IIR peripheral surround
• Long life “conex” spider
• 28 mm voice coil on fiberglass former
• 80 x 17 mm magnetic motor
• Machined aluminium phase plug
• Gold plated terminal.

2 X T20 HR HIGH RESOLUTION TWEETERS

• 5 Ω, Neo magnet
• 20mm (3/4″) textile dome diamphragm
• Compact mounting dimensions
• High efficiency magnet (N38H neodymium)
• Ferrofluid for high power handling

2 X filters BFT01 – BFW01

• 6dB/octave high-pass filter

• Tweeter level adjustable to 0 dB or attenuated to -3 dB

S6.80 Technical Specifications Sheet

T20HR Technical Specifications Sheet

You might also require (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
• Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
• Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
• Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion. 
• Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.